Polypropylene

Polypropylene (Polypropylene, PP for short) is a semi-crystalline thermoplastic. It has high impact resistance, strong mechanical properties, and is resistant to a variety of organic solvents and acid and alkali corrosion. Polypropylene is the third largest plastic after polyvinyl chloride and polyethylene, and occupies an increasingly important position in the market.

Polypropylene is widely used in various fields such as chemical industry, chemical fiber, construction, light industry, home appliances, packaging, agriculture, national defense, transportation and civil plastic products.

At present, the company's main production of polypropylene grades are T-30S, T-30SF, H40S, PPB-M02FD, also produced polypropylene grades C30S, PPB-M09FD, Y12, Y16, etc.; the company has its own R & D center for the research and development of modified products, production, and has produced grades FDY1500, FD5040, FDY1500, FD5040, 3204FD, PP flame retardant, reinforced PP, automobile bumper material, TPO material, etc. We will research and develop new grades according to the market demand.

The quality of our polypropylene products meets the technical requirements of the standard "Q∕NBFD 001-2022 Polypropylene (PP) Resin", and the following chart shows the requirements of the standard.

Technical Requirements for Polypropylene Resin (T30S)
Serial Number	Sports event		Work unit	Request
Serial Number	Sports event		Work unit	T30S
1	Particle Appearance	Color particles	kg	≤30
1	Particle Appearance	Black grain	kg	0
2	Melt mass flow rate(MFR)		g/10min	3±0.9
3	Iso-graphic index (math.)		%	≥96
4	Ash (mass fraction)		mg/kg	≤200
5	Yellow index		-	Reporting
6	Load deflection temperature		℃	≥75
7	Tensile properties	Tensile modulus of elasticity	MPa	Reporting
7	Tensile properties	Tensile Yield Stress	MPa	≥30
		Tensile breaking stress	MPa	Reporting
		Nominal strain at tensile rupture	%	Reporting
8	Bending Modulus		MPa	Reporting
9	Notched impact strength of simply supported beams		kJ/㎡	Reporting
10	Rockwell hardness (R scale)		-	Reporting
11	Film Haze		%	Reporting
12	Film fisheye	≥0.8mm	個/1520㎡	Reporting
12	Film fisheye	0.4~0.8mm	個/1520㎡	Reporting

Technical Requirements for Polypropylene Resin (T30SF)
Serial Number	Sports Event		Flat	Request
Serial Number	Sports Event		Flat	T30SF
1	Particle Appearance	Color particles	kg	≤30
1	Particle Appearance	Black grain	kg	0
2	Melt mass flow rate (MFR)		g/10min	4.4±0.4
3	Iso-graphic index (math.)		%	≥96
4	Ash (mass fraction)		mg/kg	≤200
5	Yellow index		-	Reporting
6	Load deflection temperature		℃	≥75
7	Tensile properties	Tensile modulus of elasticity	MPa	Reporting
7	Tensile properties	Tensile Yield Stress	MPa	≥30
		Tensile breaking stress	MPa	Reporting
		Nominal strain at tensile rupture	%	Reporting
8	Bending modulus		MPa	Reporting
9	Notched impact strength of simply supported beams		kJ/㎡	Reporting
10	Rockwell hardness (R scale)		-	Reporting
11	Film Haze		%	Reporting
12	Film Fisheye	≥0.8mm	個/1520㎡	Reporting
12	Film Fisheye	0.4~0.8mm	個/1520㎡	Reporting

Technical Requirements for High Melt Finger Polypropylene (H40S)
serial number	sports event		flat	Request
serial number	sports event		flat	H40S
1	Particle Appearance	Color particles	kg	≤5
		Black grain	kg	0
		Large and small grains	g/kg	≤100
		Snakeskin Grain and Drag Grain	kg	Reporting
2	Impurities and other		kg	Not have
3	Melt mass flow rate (MFR)		g/10min	4.4±0.4
4	iso-graphic index (math.)		%	≥96.0
5	Ash (mass fraction)		mg/kg	≤300
6	Tensile properties	Tensile modulus of elasticity	MPa	≥1200
		Tensile Yield Stress	MPa	≥30
		Tensile breaking stress	MPa	≥8.0
		Nominal strain at tensile rupture	%	≥200
7	Film fisheye(≥0.8mm)		個/1520㎡	≤5

Technical requirements for polypropylene resin (PPB-M02FD (EPS30R))
Serial Number	Sports event		flat	Request
				PPB-M02FD (EPS30R)
1	Particle Appearance	Color particles	kg	0
		Black grain	kg	≤30
2	Melt mass flow rate (MFR)		g/10min	2.2±0.8
3	Ash (mass fraction)		mg/kg	≤200
4	Yellow index		-	Reporting
5	Tensile Yield Stress		MPa	≥20
6	Bending modulus		MPa	≥800
7	Notched impact strength of simply supported beams	23℃	kJ/㎡	Reporting
		-20℃		Reporting
8	Load deflection temperature		℃	≥60
9	Rockwell hardness (R scale)		-	Reporting
10	Molding Shrinkage(S_M)		%	Reporting

Technical Requirements for Polypropylene Pellets (C30S)
Serial number	Sports event		flat	Request
				C30S
1	Particle Appearance	Color particles	kg	≤30
		Black grain	kg	0
2	Melt mass flow rate (MFR)		g/10min	6±1.8
3	Iso-graphic index (math.)		%	≥96
4	Ash (mass fraction)		mg/kg	≤200
5	Yellow index		-	Reporting

亚洲av无码av男人的天堂不卡,成年美女黄网站色大免费全看,最近中文字幕在线中文视频,久久丫精品国产免费,中文字幕久久综合伊人

Polypropylene

Technical Parameters